SOLID C-Band LNBF with Feedhorn for offset Ku-Band Dish Antenna

If you want to installed C-Band LNB on Ku-Band Dish antenna then this LNBF is best for you, This LNB comes with offset feedhorn and Clamp so that you can install easily.

Technical Specifications:

Input - 3.7-4.2 GHz

LO Freq.: 5.150GHz

Output Freq: 950-1450MHz

Gain: 65-70dB (Typ.)

Noise: 10K

Phase Noise : -85dBc/Hz@10KHz

Output Impedance: 75ohm F-Type

Package Included:

C-Band LNBF

Offset Clamp

Offset Feedhorn

Please note: This LNB will work great above 90cm KU-Band antennas.    

Free Delhivery

FAQs-

What is the Ku-CB1 C-Band LNBF with Feedhorn for offset Ku-Band Dish Antenna?

A particular kind of Low Noise Block Feedhorn intended for use with offset Ku-Band dish antennas is the Ku-CB1 C-Band LNBF with Feedhorn. When utilized in conjunction with a dish antenna that has an offset design, this component of a satellite dish antenna system helps to capture C-Band frequencies.

What is the main function of the Ku-CB1 LNBF?

The purpose of the Ku-CB1 LNBF is to receive and downconvert C-Band frequencies so that a set-top box or satellite receiver can process and receive them. It has a feedhorn, which is a necessary part for directing the signals onto the LNBF.

What is a C-Band LNBF?

A satellite dish antenna system's C-Band LNBF (Low Noise Block Feedhorn) is an essential component for obtaining C-Band frequencies from satellites. After being downconverted by the LNBF, the received signals are now ready to be sent to a satellite receiver or set-top box.

How does the Ku-CB1 LNBF work with offset Ku-Band dish antennas?

 What are the advantages of using the Ku-CB1 LNBF with an offset dish antenna?

The Ku-CB1 LNBF can efficiently capture C-Band signals in a configuration that reduces signal obstruction when used in conjunction with an offset dish antenna. This design is very useful in areas where there can be challenges or interference.